MUST 653 Medium Blue PVC Cement
| Part No | MPC654-139 | MPC654-122 | MPC654-115 | MPC653-108 |
| Packing | 32FL.OZ(947ML) | 16FL.OZ(473ML) | 8FL.OZ(237ML) | 4FL.OZ(118ML) |
| Contain | 12 | 12 | 24 | 27 |
| Measure | 43.5*32.5*14.5cm | 34*26*12cm | 40.7*27.6*10.6cm | 33.5*22.8*9.3cm |
| G.W. | 11.3kg | 6.2kg | 6.2kg | 3.6kg |
Description
MUST MPC 653 Medium Blue PVC Cement is a blue, low VOC emission, medium bodied, fast setting, high strength PVC solvent cement for all classes and schedules of pipe and fittings with interference fit through 6 inch (160 mm) diameter, Schedule 80 through 4 inch (110 mm) diameter.
Areas of Use
MUST MPC 653 Medium Blue PVC Cement for use on rigid and flexible PVC pipe and fittings, including PVC foam core DWV. It is specially for mulated for applications where conditions are wet and quick pressurization of the piping systems is desired. It is used in irrigation, pool, spa and other applications. It can be used without primer on non-pressure systems.
Method of Application
1. Pipe and fittings should be cut square, deburred and checked for proper fit.
2. Clean pipe and fitting with a pipe cleaner or rag.
3. Prime pipe with a primer.
4. While primer is still wet, apply liberal coat of cement on pipe to the depth of the fitting hub, leave no uncoated surface. Apply a thin coat of cement to inside of fitting, avoid puddling of cement. Puddling can cause weakening and premature failure of pipe or fitting. Apply a second coat of cement to the pipe.
5. Assemble parts very fast when primer is fluid.
6. Push pipe fully into fitting by turning motion until pipe bottoms.
7. Hold pipe and fitting together for 30 seconds to prevent pipe push-out. Then Wipe off excess.
8. Allow 15 minutes for good handling strength and 2 hours cure time
9. Allow correct cure times to pass before the plumbing system is tested.
Storage
2 years in tightly sealed containers. Stability of the product is limited
