MUST MPC 654 Heavy Duty Gray PVC Cement
| Part No | MPC654-177 | MPC654-160 | MPC654-153 | MPC654-146 |
| Packing | 32FL.OZ(947ML) | 16FL.OZ(473ML) | 8FL.OZ(237ML) | 4FL.OZ(118ML) |
| Contain | 12 | 12 | 24 | 27 |
| Measure | 43.5*32.5*14.5cm | 34*26*12cm | 40.7*27.6*10.6cm | 33.5*22.8*9.3cm |
| G.W. | 11.3kg | 6.2kg | 6.2kg | 3.6kg |
Description
MUST MPC 654 Heavy Duty Gray PVC Cement is formulated for use on all schedules and classes PVC pipe and fitting up to 12" diameter with interference fit, up to 18" for non-pressure.
Areas of Use
MUST MPC 654 Heavy Duty Gray PVC Cement is heavy, slow setting, low VOC PVC cement for all classes and schedules with interference fit. Premium, high-strength formulation for large size industrial piping systems. Ideal for fabrication of large fittings and applications requiring high gap filling properties.
Method of Application
1. Pipe and fittings should be cut square, deburred and checked for proper fit.
2. Clean pipe and fitting with a pipe cleaner or rag.
3. Prime pipe with a primer.
4. While primer is still wet, apply liberal coat of cement on pipe to the depth of the fitting hub, leave no uncoated surface. Apply a thin coat of cement to inside of fitting, avoid puddling of cement. Puddling can cause weakening and premature failure of pipe or fitting. Apply a second coat of cement to the pipe.
5. Assemble parts very fast when primer is fluid.
6. Push pipe fully into fitting by turning motion until pipe bottoms.
7. Hold pipe and fitting together for 30 seconds to prevent pipe push-out. Then Wipe off excess.
8. Allow 15 minutes for good handling strength and 2 hours cure time
9. Allow correct cure times to pass before the plumbing system is tested.
Storage
2 years in tightly sealed containers. Stability of the product is limited
