MUST 652 Medium Clear PVC Cement
| Part No | MPC652-078 | MPC652-061 | MPC652-054 | MPC652-041 |
| Packing | 32FL.OZ(947ML) | 16FL.OZ(473ML) | 8FL.OZ(237ML) | 4FL.OZ(118ML) |
| Contain | 12 | 12 | 24 | 27 |
| Measure | 43.5*32.5*14.5cm | 34*26*12cm | 40.7*27.6*10.6cm | 33.5*22.8*9.3cm |
| G.W. | 11.3kg | 6.2kg | 6.2kg | 3.6kg |
Description
MUST MPC 652 Medium Clear PVC Cement is a clear, low VOC emission, medium bodied, very fast setting, high strength PVC solvent cement for all classes and schedules of pipe and fittings with interference fit through 6 inch (160 mm) diameter, Schedule 80 through 4 inch (110 mm) diameter.It can be used without primer on non-pressure systems if local codes permit.
Areas of Use
MUST MPC 652 Medium Clear PVC Cement is specially formulated for use in a wide range of temperatures encountered during all seasons of the year. It is suitable for use on rigid and flexible PVC pipe and fittings for irrigation, electrical conduit, pool & spa and plumbing.
Method of Application
1. Pipe and fittings should be cut square, deburred and checked for proper fit.
2. Clean pipe and fitting with a pipe cleaner or rag.
3. Prime pipe with a primer.
4. While primer is still wet, apply liberal coat of cement on pipe to the depth of the fitting hub, leave no uncoated surface. Apply a thin coat of cement to inside of fitting, avoid puddling of cement. Puddling can cause weakening and premature failure of pipe or fitting. Apply a second coat of cement to the pipe.
5. Assemble parts very fast when primer is fluid.
6. Push pipe fully into fitting by turning motion until pipe bottoms.
7. Hold pipe and fitting together for 30 seconds to prevent pipe push-out. Then Wipe off excess.
8. Allow 15 minutes for good handling strength and 2 hours cure time
9. Allow correct cure times to pass before the plumbing system is tested.
Storage
2 years in tightly sealed containers. Stability of the product is limited
