MUST 651 Regular Clear PVC Cement
| Part No | MPC651-030 | MPC651-023 | MPC651-016 | MPC651-009 |
| Packing | 32FL.OZ(947ML) | 16FL.OZ(473ML) | 8FL.OZ(237ML) | 4FL.OZ(118ML) |
| Contain | 12 | 12 | 24 | 27 |
| Measure | 43.5*32.5*14.5cm | 34*26*12cm | 40.7*27.6*10.6cm | 33.5*22.8*9.3cm |
| G.W. | 11.3kg | 6.2kg | 6.2kg | 3.6kg |
Description
MUST MPC 651 is a clear, regular, fast setting, high strength PVC solvent cement for most classes and schedules. It is used for pipe and fitting with an interference fit through 4 inch (110 mm) diameter.
Areas of Use
MUST MPC 651 is for use on all types of PVC plastic pipe applications. It is suitable for use with potable water pressure systems, irrigation, turf, foam core, conduit, industrial pipe applications, sewer, drain, waste and vent systems.
Method of Application
1. Pipe and fittings should be cut square, deburred and checked for proper fit.
2. Clean pipe and fitting with a pipe cleaner or rag.
3. Prime pipe with a primer.
4. While primer is still wet, apply liberal coat of cement on pipe to the depth of the fitting hub, leave no uncoated surface. Apply a thin coat of cement to inside of fitting, avoid puddling of cement. Puddling can cause weakening and premature failure of pipe or fitting. Apply a second coat of cement to the pipe.
5. Assemble parts very fast when primer is fluid.
6. Push pipe fully into fitting by turning motion until pipe bottoms.
7. Hold pipe and fitting together for 30 seconds to prevent pipe push-out. Then Wipe off excess.
8. Allow 15 minutes for good handling strength and 2 hours cure time
9. Allow correct cure times to pass before the plumbing system is tested.
Storage
2 years in tightly sealed containers. Stability of the product is limite
