MUST High-Temp Silicone Gasket Maker CLEAR 85g

Part No: MGMCL-210

Packaging:85g

Contain:144pcs

Measurment:62*43.5*23.5cm

G.W.:18kg

Description

MUST High-Temp Silicone Gasket Maker CLEAR is a general purpose, single component, room temperature vulcanizing (RTV) compound, designed for the sealing of mechanical assemblies. Upon curing from the exposure to moisture in the air, this non sagging paste forms a tough, flexible, waterproof seal of silicone rubber, which resists aging, weathering and thermal cycling without hardening, shrinking or cracking.

Features

Intermittent Temperature range 500℉(260℃)

Superior adhesion and flexibility

Waterproofs

Insulates

Unaffected by vibration

Non-flammable, Non-toxic

Areas of Use

•Lens housings

• Windows

• Door frames

• Vinyl tops

• Housings and covers

Application

1. Remove any previous gasketing materials from mating surfaces.

2. Ensure surfaces are clean, dry and free of loose materials, dust, grease, rust and other contaminants.

3. Remove the cap from the tube and pierce the seal with reverse side of cap. Attach extension nozzle which can be cut to desired bead width.

4. Apply a continuous bead of silicone to mating parts, making sure to surround all bolt holes.

5. Assemble parts and allow to cure. Material dries tack free within 3-10 minutes and fully cures in 24 hours.

6. After use allow excess sealant to extend beyond extension nozzle to cure. To reuse, remove the cured plug from tip of extension nozzle.

Storage

When stored in the original unopened containers at or below 90°F (32°C), it has a shelf life of 12 months from date of production.

In Countries where high heat and humidity are a factor, special precautions must be taken. Store product in a covered, well-ventilated warehouse and avoid excessive heat conditions. Storage in high heat, high humidity conditions may reduce shelf life by up to 30%.