MUST WATERPROOF BAND

MUST WATERPROOF BAND Adheres to bricks, concrete, cement,tiles, roofing felt, metal, slate, glazing bars, glass fiberglass, and most rigid plastics

PREPARATION: Surfaces must be clean, dust free and dry.To improve adhesion on porous, rough, dusty surfacesin cold or damp weather, use bituminous Waterproof Band and primer. Porous surfaces- dampen lightly with water before application.Non-porous surfaces -should be dry and only slightly damp. Apply Waterproof Band Primer with a water dampened brush. Allow to dry, protect from rain and frost. Fill cracks wider than 3mm, deep hollows or depressions.

APPLICATION: Cut Waterproof Band to required length. Remove the backing step by step and place Waterproof Band into position, Press Waterproof Band into place by hand, avoid excessive pressure. When laying adjacent rolls, the Waterproof Band must overlap by at least 25 mm Use a seam roller or a rounded piece of wood to smooth the Waterproof Band and ensure good contact is made. In cold weather, application must be made easier by warming the surfaces and by storing Waterproof Band in a warm place prior to use, Do not apply if surface temperature is below 5C Waterproof Band can be over painted with conventional decorative paints, though straining may occur at the edges.

STORAGE: Store in cool, dry place. keep away from sources of ignition.