MUST Heavyweight Body filler 5.5kg

Description

MUST Heavyweight Body filler is formulated with high quality polyester resins and ultra fine talcs to spread smoothly, set quickly and sand to a fine featheredge.

Features

• With superior bonding

• Spreads smoothly and sets quickly

• Easy to sand

• Ideal for vertical repairs

Aera of Use

• Most metal surfaces (always check before proceeding, if uncertain)

• Polyester body filler

• Glass reinforced polyester (GRP & general types of fibreglass body parts)

• Sound existing surfaces, except for unstable surfaces such as thermoplastic crylics, nitrocellulose or enamels

Direction of Use

All surfaces must be thoroughly sanded and cleaned with Wax & Grease Remover prior to application. Ensure the surface is thoroughly dry before proceeding

Mix filler on a clean non-porous board. Add 2% hardener. Mix filler and hardener till a uniform colour is observed. Apply putty to surface with firm pressure, do not apply heavy coats. Apply thin layers working to a smooth surface.

Clean and degrease the entire panel to be repaired with soap and water, followed by a mild cleaning solvent. Surface must be thoroughly dry before repairing or applying material.

Keep the repair area small. Use 40-80 grit to remove the paint and feather edge.

Stir the filler before using. Knead the cream hardener.

Measure hardener 2% by weight (add a ribbon of cream hardener from edge to edge across the center of a 4” diameter puddle).

Puddles larger than 4” (10 cm) in diameter will require additional hardener. Mix thoroughly until uniform color is achieved. Approximate setting time is 5-6 minutes at 72°F (22°C)，Apply in layers with even firm pressure. Do not apply all at once.

Rough shape with 40 – 80 grit (as needed) ，Sand filler with 80 grit or finer.Final sand repair and paint edge 180 grit.

For best results, apply a premium Ever coat polyester putty to provide a smoother finish and reduce the amount of primer surfacer needed for a quality finish.

Shelf Life

12 months in an unopened container at room temperature.