MS Polymer Adhesive and Sealant
Description
MUST® MS Polymer Adhesive and Sealant is a single component, high performance, flexible sealant and high strength adhesive in one for interior use. It cures to form a permanent, flexible seal and tough bond, even under water, and does not require any primer to adhere to sound, dust-free, temperature resistance, no deformation, no cracking and can be painted.
Features
- Universal adhesive and sealant
- No shrinkage and bubble free
- Adheres without primer on most surfaces
- Adheres even in wet conditions
- Neutral curing, almost odourless
- Non-corrosive towards metals
- High mechanical resistance strength and E-modulus
- Absorbs acoustic and mechanical vibrations
Application
1.Surface must be clean, dry and free from grease and old glue. Mask smooth surface to simplify clean up. Apply to one surface only.
2.Apply to one surface, using 1 drop per square inch of surface
3.Assemble parts and hold together with pressure for few minutes or until set.
4.Apply suitable pressure on bonding substrates. Clean off excess adhesive with acetone.
5.The skin-forming time of this product is15 min, curing speed is 2~3mm/day
6.The application environment should be higher than 5°C and lower than 45 °C
Limitation:
- Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene and bituminous substrates
- Not suitable for natural stone and mirrors
- Not suitable for movement or glazing joints
- Not suitable for continuous water load
- Not suitable in combination with chlorides (pools)
- With prolonged UV exposure, product can discolour and become less UV stable
Caution:
1.It must be placed out of reach of children. Do not swallow.
2.Do not get in eyes or on skin. If on skin: Wash with soap and water. If in eyes: Rinse cautiously with water for several minutes Remove contact lenses and continue rinsing. If irritation occurs, seek medical advice.
Storage
When stored in the original unopened containers (between 5°C to 25°C), it has a shelf life of 12 months from date of production.
