MUST Gasket Maker 50ml
Description
MUST® BLACK RTV Silicone Sealant General Purpose Gasket Maker it is a sealer and joint maker for general purpose, dry to the touch in a period of 20 to 30 minutes. It allows to be applied on vertical and horizontal surfaces, ideal for various applications.the total curing is reached after 24 hours of its application.
Areas of Use
| Valve rocker cover | Timing chain cover | Water pumps |
| Oil pan corner seals | Thermostat housings |
Differential cover |
Method of Application
1.Remove any previous gasketing materials from mating surfaces.
2.Ensure surfaces are clean, dry and free of loose materials, dust, grease, rust and other contaminants
3.Remove the cap from the tube and pierce the seal with reverse side of cap. Attach extension nozzle which can be cut to desired bead width.
4.Apply a continuous bead of silicone to mating parts, making sure to surround all bolt holes.
5.Assemble parts and allow to cure. Material dries tack free within 3-10 minutes and fully cures in 24hours.
6. After use allow excess sealant to extend beyond extension nozzle to cure. To reuse, remove the cured plug from tip of
extension nozzle.
Storage
When stored in the original unopened containers at or below 90'F(32'C), it has a shelf life of 12 months from date of production.
In Countries where high heat and humidity are a factor, special precautions must be taken. Store product in a covered, well-ventilated warehouse and avoid excessive heat conditions. Storage in high heat, high humidity conditions may reduce shelf life by up to 30%.
Colour
BLACK BLUE RED GRAY
