MUST Exhaust System Cement

MUST EXHAUST SYSTEM CEMENT is a specially formulated thick, non-slumping paste type material that permanently repairing small holes and leaks in silencers and exhaust systems.

MUST EXHAUST SYSTEM CEMENT is a specially formulated thick, non-slumping paste type material that permanently repairing small holes and leaks in silencers and exhaust systems.

 

 

 Part No  

  MEC-384
 Packing    170g
 Contain    144
Measure   36.5*31.5*40cm   
 G.W.   24.5kg

 

 

Description:

Must is a specially formulated thick, non-slumping paste type material that permanently repairing small holes and leaks in silencers and exhaust systems.

 

Directions for use:

1.Surfaces to be repaired should be free of dirt,grease,oil and rust.

2.Wet the surface to be repaired with water.

3.Apply the sealer directly over the hole.

4.Allow drying for 30 minutes then starting engine and allow to run for 10 more minutes.

5.For new installations, apply sealer ¼ inch thick around inside of larger pipe.complete and seal the connection.

 

Storage:

Products shall be ideally stored in a cool, dry location in closed containers at atemperature between 18'c to 30°c(64°f to 86°f)unless labeled. Do not return any material to its original container avoid contamination of unused product.

 

Caution:

Read and understand material safety data sheet of this product before handling or using.